BMW Z4 GT3 rear wing assembly

Its taken some time but we are happy to say we have the final piece to our Z4 GT3 Jigsaw puzzle, getting hold of a genuine rear wing assembly, the wing is the easiest part to get hold of as we can simply manufacture any width any length wing with various profiles, all we have to do for the Z4 is make sure we have the correct width. We already had the early type rear wing set up, but its chassis mounted uprights which was great if you had the race car with the fixed roof, but not so great if your converting road cars and you still have the steal electric hood, we will possibly look at changing our roof to the authentic GT3 at some point, as we have found a German supplier that produces the roof and the mirrors if we need them, but not everyone wants a fixed roof, they want the convertible option, and you cannot use the roof as the wing uprights are bolted strait to the boot floor and the rear wing will not let the roof work correctly, so we have been after the later style with the boot mounted assembly for a while now, and its great to finally source a pure race wing set up, with the twin blades.

BMW Z4 GT3 Rear Wing Assembly

BMW Z4 GT3 Rear Wing Assembly

BMW Z4 GT3 White

BMW Z4 GT3 Rear Wing Assembly

BMW Z4 GT3 REAR WING ASSEMBLY

Lots of people have said we shouldn't fit the wing as we are building a road car, and to some extent we agree, but this conversion needs it, this is a really aggressive looking car, the authentic GT3 kit is super wide, so the GT3 rear wing set up is the cherry on the top, and one this wide body V8 needs, with the added bonus and advantage of advertising space, which is priceless.

We will be having the aluminium supports laser cut and manufacturing, the double wing set up will be manufactured in carbon fibre, email us for more details if you happen to be building a Z4 GT3 or you just fancy fitting the GT3 rear wing assembly on your BMW E89 Z4 Chassis.

#BMWZ4 #BMWWideBody #BMWZ4GT3 #BMWZ4E89GT3 #BMWZ4GT3rearwing #RearwingassemblyGT3Z4 #vaddesign #VADBMWZ4GT3

BMW Z4 GT3 LS3 V8 Road Conversion

The VAD BMW Z4 (E89) has finally finished its first round of modifications with the completion of our crate LS3 6.3LTR V8 engine installation, coilover suspension, brake and exhaust upgrade and we must say its turned out looking pretty immense, Craig at Dynotorque has done a pretty spectacular job, the engine install looks like it came out of the factory with this engine in place it’s that neat and tidy, it looks at home with plenty of room over the original 2.5Ltr N52B25 engine, it sits much further back with better weight distribution, with the added fact it’s a much lighter unit, we can’t just wait to hit the street in this beast, it’s going to be a pretty radical looking machine out on the open roads.

For the next stage we will be making a few suspension adjustments and will be modifying the inner fenders especially at the rear to accommodate the much larger wheel and tyre fitment, so the 13x19 and 345/30 tyres will fit as they should without any rubbing under load, It’s a necessary mod for any modified car that is having a wide body install, then it will be off to Emerald for the final map and Can-Bus setup, and then she will be ready to head off down to our composite partners BAMD for the Aspect GT carbon body GT3 install, Adam can’t wait to get his hands on this beast, and we can’t wait for him to give this build his magic touch.

Its taken us two years to research exactly what was required, along with the final spec of what we wanted, we did consider the S65 BMW V8, but after a conversation with Craig who explained the pitfalls of going that route, but how simple the LS3 conversion as well as the cost implications, it seemed like a no brainer, our vision and dream of building the ultimate road going Z4 is almost complete, and although we will upset some purists out there, we just remind ourselves, we have built this car for us, and we are happy with the route we have taken with this build.

We will be blogging when the car is down at BAMD, so be sure to bookmark us and follow the progress as it happens.

Trial fit of the rear carbon fibre GT3 wider rear quarter panel

First start up of the VAD BMW Z4 GT3 V8 LS3

#BMWV8LS3Conversion #BMW63V8LS3 #BMWZ4 #BMWWideBody #BMWRace #BMWV8 #BMWe89V8conversion #BMW #BMWZ4GT3 #GT3Z4 #e89BMWGT3Z4

BMW Z4 GT3 V8 Project update

Since our last blog post on our BMW Z4 GT3 V8 Project, its starting to move forward quite nicely, with the engine in and wiring being done, we have turned our attention to the exhaust system, with Craig putting his welding skill set to good use, this guy has some serious skills with a TIG welder in his hand, the welds are pure works of art, and the system looks absolutely brutal, full twin stainless set up, with one box in the centre, he mentioned a fruity sound last time we spoke, after seeing it up close and personal we now understand the meaning of fruity.

BMW Z4 GT3 V8

BMW Z4 GT3 V8

BMW Z4 GT3 V8

Another piece of the jigsaw landing this week was our 3 piece forged wheels from the AG factory, 10.5x19 and 13x19 AG F420 and the AGL23 both look amazing in the flesh, we think we choose extremely wisely with not only the designs, but the finish too.

Next on the long list of things to do, is the suspension and brake set up, we will report back as they hit our Z4.

Another little project we have kicked off this week, after a conversation with Steve Van Der Vorst from DLNG Designs , as we really want to run a set of his extremely cool motorsport themed race Turbo fans, we will discuss this in further detail in another blog, but Steve is as stoked to work on this project as we are having him on-board.

For any details on our Z4 V8 GT3 build, feel free to get in touch with us, we will be more than happy to assist, in any way we can.

#BMWV8LS3Conversion #BMW63V8LS3 #BMWV8 #BMWZ4 #BMWWideBody #BMWZ4E89GT3 #DLNGDesigns #Turbofans #CustomExhaust #CarbonAero #ForgedWheels