top of page
Search
Writer's pictureVAD Admin
Apr 5, 20192 min read

Time Attack R56 Mini with Attitude

Updated: Sep 25, 2019


Our R56 Mini aero kit programme is going from strength to strength as our flares seem to be finding their way on to some pretty epic builds, Gary Adams who is based in Florida is a personal favourite, we just love what Gary has done and the plans he has in store for his amazing cooper S, with his wheel upgrade happening over the next couple of weeks its going to be worth a revisit.

Next up to mini wow us is this little pocket rocket from Italy that belongs to Mauro Abdel Nour of P3M, Mauro contacted us a few weeks back regarding a new set up he wanted on his time attack Mini cooper-s, as he wanted a wider track so was looking for a wider fenders and ours fitted the bill perfectly and just what he had in mind, we wasted no time in producing a couple of sets for his up and coming race season, but I can honestly say we didn’t expect it to turn out quite like this little bundle of joy pictured here, he has taken the look to a whole new level, its extreme to the point of mini perfection.

We already knew that Mauro had ordered his wheel set up from ATS and we also knew it was going to be a pretty aggressive width and offset, but he was quietly confident it would all work and we have to say he was spot on as those ATS GTR’S with the negative -5 offset fill our fenders to the absolute maximum and just look at it, its an absolute stunner, we are really looking forward to the P3M crew this season as they hit the Italian time attack series in anger.

Full specification

Engine: N14 block with Darton sleeves, forged internals, stock crankshaft, stock heads, sport cams.

Fuel system: RPM Power Engine Management dual injection system (stock direct injection + additional port injection system with custom control module), Aeromotive low pressure fuel pump.

Turbocharger: Borg Warner EFR6758 with custom manifold, Turbosmart dual port wastegate, GFB boost control solenoid.

Chassis: FIA approved full rollcage, Bilstein MotorSport fully adjustable coilovers, Eibach sway bars, DNA adjustable front and rear control arms, Drexler racing LSD, ATS MotorSport GTR 9x17 ET -5 wheels, TAROX racing callipers with custom wave design rotors.

Bodywork: VAD wide fender flares, dry carbon bonnet and rear wing, GP Garage VTR racing front bumper and doors

Owned by Team P3M, built by FastGarage, tuned by RPM Power Engine Management

KRAKEN 2.0 P3M R56 Mini, VAD Wider fenders, ATS 9X17 GTR Forged race wheels

For more details on the R56 fender flares, get in touch with us, we carry and stock and can ship globally.

0 comments
Writer's pictureVAD Admin
Mar 22, 20192 min read

Mini R56 Wider Flares & wheels to match

Updated: Sep 25, 2019


For every set of R56 mini flares we sell we are asked about the wheels and what wheels can be used. The problem when you add extra width to your build you need a wider wheel and tyre set up, even our R56 flares add a couple of inches that need to be filled with a wheel. The wheel width needed for our particular flare is a 9" wheel with a bespoke offset front and rear in either a 16" or 17" sizes and that's where the problem lies, you have to look at a 2 or a 3 piece wheel set up for those types of widths and the required offsets, or use a narrower wheel with a large hub-centric spacer set up, and neither are ideal, the multipiece wheel route is expensive, and a slimmer wheel and spacer is the cheaper option but defeats the purpose

Trying to find a 1 piece wheel with the correct width and offset that will work with the conversion has been a bit of a headache, even for us has been an impossibility to find, we have come close but unfortunately no cigar, that is until now, and we are extremely pleased to be able to offer a 1 piece super light weight wheel, that you can not only use on the road, but also use on the track, available in the correct size, width and offsets for our wide flare conversion, so no need for a spacer or the expensive 2 or 3 piece option, at the moment its only available in the 17" size with either an 8.5x17 or 9x17 widths, that can be fitted with either 234/40R17, 245/40R17 or 255/40R17, all great combinations and can be used with the selected widths we have listed, we can also supply tyres at super competitive prices.

Motec light weight Nitro MCR1 15" 16" 17" 18" 19" sizes available

The Motec MCR1 wheel is a lightweight wheel, available in the correct 4x100 pcd,with direct centre bore and correct offsets we need for the flare front and rear, so for all of our customers that are looking to build a wide fendered R56 mini, you now have the perfect wheel solution that not only good to look at, but is light weight, it has the correct specification and the best part is its competitively priced, with the added bonus of amazing European quality, which is what we strive for. Get in touch with us for further details on our R56 mini upgrades and builds.

0 comments
Writer's pictureVAD Admin
Mar 5, 20192 min read

Gary Adams radical wide fender R56 Mini Cooper S

Updated: Nov 21, 2019


We have been actively involved in the new Mini scene for quite some time, especially the R56, R57, R58 & R59 models with us looking to branch out into the F56 model sometime this year with a flare and a trick wheel set up.

Our main focus has been based around the flares with us wanting to fit a wider wheel and tyre set up, there are a few kits on the market and we have purchased and fitted all of them, without going into detail the quality has been somewhat disappointing and when your spending the best part of £750 to £1000 you want a good quality product, which we didn't get, so we manufactured our own and we now have the quality as well as the fit and finish we want, as with all of the products we make, for us its about controlling the the quality which is a pretty important factor when your selling and manufacturing your own parts.

 

Gary Adams and his epic wide fender Mini Cooper S

Some of the first parts we made and sent out have been to Italy for a race going Cooper S for Team P3M ASD and a set has found its way to Florida for our good Friend Gary Adams and his amazing road going cooper S, this particular Mini has been a labour of love with Gary spending some serious amounts of cash on not only the look of this stunner but also the performance side of this matt black beauty, which is also acting as a great advertising campaign for his company, Natural Instinct Dog Training.

At the moment Gary is sitting on an aggressive set of 9x15 Koenig wheels fitted with 245/40R15 tyres which are soon to be updated to a set of 9x16 with suitable larger tyres, we love the way it sits on the BC coilover suspension Gary has previously installed, it just looks so menacing.

We are looking forward to seeing Gary progress with this build and see his vision come to fruition, for us it looks absolutely perfect just as it is.

https://www.naturalinstinctdogtraining.net

Over the next couple of weeks we will see Mauro from P3M take to the track in his Mini cooper s that has been dressed too in our wider flares, this is a very special build, especially as it will be sitting on a very special set of ATS Motorsport GTR light weight wheels, in 17" with a very aggressive offset and slick tyres will make one awesome looking Mini.

For more details on our Mini parts get in touch with us, our parts list is about to expand for the R53 as well as the newer F56 models.

2 comments
bottom of page