Toyota Supra Wide Body Builds

In the space of a couple months we have a total of four Speedwells blown out wide bodies being constructed, we have already discussed in detail Sean Reid’s beautifully prepared Porsche Slate Grey example, which is not far off being finished, its one we were desperate to photo-shoot before the weather turned, but Sean has been really busy with work and trying to get the car finished, so we may not see this stunner until the new year and winter is over, disappointing but this happens with most long term builds.

Sean Reid and his Speedwells Wide Body Supra in Preparation

Our second build belongs to Nizam Chowdury from County Durham, we haven’t been privy to this particular build, but we are reliably informed it is going pretty well, so no doubt we will report on this build as we get more news in, its a home build so one we are always keen to show case.

Speedwells Supra, Sitting waiting to be caressed with paint, at Next Level Automotive

Speedwells Wide Body Supra JZA80

Speedwells Wide Body Supra JZA80

Our third build is our crew from the Netherlands, Next Level Automotive, these boys have just impressed us no end, as per our last blog post they pretty much fitted the kit within 4 days to perfection, the install has now been primered and will be left for 3 to 4 weeks before the guys hit the body fineness stage getting it ready for paint, thats a stage we are really looking forward to seeing.

Our fourth and final build is Thomas Larsen from Denmark who has just started to mock fit the rear end of the bumper and rear quarter panels, getting them perfected before they get bonded into position, as we have found out Thomas is a bit of a perfectionist and this build is being done at his home, so it’s going to be caressed and no doubt will be panel perfect before it heads in to the paint shop, it looks like this will be a long winter build and one we are going to follow closely as Thomas looks for the perfect fitment, as with all these types of builds panel fit and panel gap is paramount, a factor that Thomas is extremely keen to get spot on, which is a credit to how he is approaching his build, and as this is the first of its kind in the Scandinavian market, we are pleased to find some one so meticulous in their detail.

Speedwells Wide Body Supra JZA80

Speedwells Wide Body Supra JZA80

Thomas Larsen from Denmark, build in progress of his Speedwells Wide Body Supra, the first of its kind for the Scandinavian market.

We are extremely lucky to have so many builds happening at once, all striving to build the best wide body Toyota Supra, it one car that seems to be growing in popularity once again with the level of enquiries we have on the aero pack on a weekly basis.

For more details on the ultimate enhancement for your own Supra, get in touch with us today, come and join the world’s most desirable Supra team, Speedwells.

#SpeedwellsToyotaSupra #speedwellsBirmingham #Speedwellsrefurb #SpeedwellsSupra #SpeedwellsWideBodySupra #RidoxSupra #WidebodySupra #ToyotaSupra #SupraJZA80 #WideBodySupra #NextLevelAutomotiveNetherlands #NextLevelAutomotive #NLANetherlands #SpeedwellsDenmark #SpeedwellsScandinavia #Aerokits #BodyStyling #BodyKits #CarbonFibre #JDM

Porsche parts expansion

Our Porsche 997 parts list just seems to grow by the day, especially the GT3R parts list, with parts now being added for the track day race car purist.

All of the main body parts are available for road application, as well as supplying more and more people globally for time attack Porsche builds, with the Australian market getting extremely popular for our 997 GT3R parts. So what is new or should we say what is available that many road builders over look, the parts that really are not needed for road going builds.

Firstly, we now have the bumper grill front and rear with a nicer mesh design, the older version is expensive to manufacture, but in our opinion looks a little cheap with the old school mesh design, with the new more modern looking mesh it just looks that much nicer, albeit the track guys still seem to prefer the older design, but it’s nice to have the option of both styles.

We have never really showcased the fact that we do extremely lightweight carbon fibre cup doors, which are ridiculously light, around 5 KG per door to be precise, we also do the complete set of Polycarbonate windows, front and rear with all of the side glass replacements.

Other parts that we have added to the list is the carbon fibre roof and the flat bottom under floor which runs the complete length of the floor, the front floor interlocks with the splitter, so with this kit even if you didn't want to run the complete floor you have to fit the front section, to fit the front splitter. The middle second links into the gear floor, which then links into the rear floor (the diffuser ), if you fit the gear floor you can then fit and run the rear brake cooling channels, which is crucial for track use, as are the front brake channels which run from the front bumper to the front brake which we also have in our parts list.

Porsche 997 Cup

Porsche 997 GT3R

Porsche 997, 981, 991 Cup Light Weight Carbon Fibre Door, Porsche 997 GT3R Diffuser with brake cooling channels

Sleepers Speed Shop Porsche 997 GT3R Build

Porsche 997

Porsche 997

The parts we have that are rarely used are the Kevlar arch liners, possibly down to the fact that there are 2 parts to each arch and they are an expensive part of the basic conversion, most people want to fabricate their own liners, but these kevlar really do finish off the build to absolute perfection.

The rear engine cover we now offer different variations along with the wing size, for the GT3R conversion we still have the large 1970 mm carbon blade with larger aluminium supports, fitted with the ducktail engine cover with the two large intakes that the R is renowned for, as well as a smaller wing set up, we are also working on a 993 GT2 Evo rear engine cover for the 997 which should be available all being well the first part of 2019.

997 R engine cover

997 R engine cover

No conversion is complete without the suspension set up and we have custom Bilstein PSS10 as well as JRZ both being manufactured to our own specification for the R conversion, along with our full arsenal of adjustable suspension arms front and rear.

Other additions that we will be discussing in the coming weeks are our Inconel exhaust system for the R conversion and out super lightweight Magnesium wheels as well as our all new deep concave Monoblock forged wheels that we can now manufacture specifically for this conversion.

To view all of the additional Porsche Parts click the link https://www.vaddesign.com/porsche-parts

#PorscheRacing #PorscheParts #Porsche997 #Porsche981Cayman #Porsche991 #Carbondoors #Porschesplitter #PorscheDiffuser #PorscheCupMirrors #PorscheRearWing #JRZMotorsportLine #JRZSuspensionEngineering #JRZSuspension #Bilstein #Bilsteinuk #CarbonFibre #CarbonFibreAero #AeroStyling #BodyKit #BodyStyling